上海傳秋生物科技有限公司 424100.com.cn

大鼠脂聯素（Adiponectin）定量分析

酶聯免疫檢測試劑盒

本試劑盒僅供科研使用。用于體外定量檢測大鼠血清、血漿或細胞培養上清液中的 Adiponectin 濃度。使用前請仔細閱讀說明書并檢

查試劑組分是否完整, 本試劑盒僅供科研使用。如有產品包裝破損或質量投拆，請?jiān)谑盏截浺粋€(gè)月之內聯系我們。

Adiponectin簡介：

脂聯素（也被稱為P30和GBP28）是一種脂肪細胞來源的對代謝作用和炎癥反應具有重要作用的自分泌和旁分泌型的蛋白。在脂肪細

胞分化過程中產生，并在胰島素刺激下分泌。脂聯素具有刺激脂肪細胞分化，脂肪酸的代謝和增敏胰島素的作用，并對肥胖、II型糖尿病和

動脈粥樣硬化起遏制作用。需要指出的是，脂聯素是一種促炎癥的因子，對諸如內風濕性關節炎和腸炎等非代謝性的病癥具有促炎性的作

用。

成熟的大鼠脂聯素由66個氨基酸構成的膠原樣結構的N末端和137個氨基酸構成的C1q樣球蛋白結構的C末端組成。在體內，脂聯素有

三種低聚形式的復合體，包括高分子量的復合體（HMW），中等分子量的復合物（MMW，也叫六聚體復合物）和低分子量的復合物（LMW，

也叫剪切體）。不同形式的脂聯素復合物通過不同的信號傳導途徑，起不同的作用。

檢測原理:

本試劑盒采用雙抗體夾心ELISA法檢測樣本中Adiponectin 的濃度。大鼠Adiponectin 捕獲抗體已預包被于酶標板上，當加入標本或

參考品時，其中的大鼠Adiponectin 會與捕獲抗體結合，其它游離的成分通過洗滌的過程被除去。當加入生物素化的抗大鼠Adiponectin 抗

體后，抗大鼠Adiponectin 抗體與大鼠Adiponectin 接合，形成夾心的免疫復合物，其它游離的成分通過洗滌的過程被除去。隨后加入辣

根過氧化物酶標記的親合素。生物素與親合素特異性結合，親合素連接的酶就會與夾心的免疫復合物連接起來；其它游離的成分通過洗滌

的過程被除去。最后加入顯色劑，若樣本中存在Adiponectin 將會形成免疫復合物，辣根過氧化物酶會催化無色的顯色劑氧化成藍色物質，

在加入終止液后呈黃色。通過酶標儀檢測，讀其450nm處的OD值，Adiponectin 濃度與OD450值之間呈正比，通過參考品繪制標準曲線，對照

未知樣本中OD值，即可算出標本中Adiponectin 濃度。

大鼠Adiponectin定量分析酶聯免疫檢測試劑盒組成:

組分 規格（96T/48T）

大鼠Adiponectin抗體預包被板 12條/6條

5×標準品稀釋液 20ml/10ml

大鼠Adiponectin標準品 2/1支(凍干)

大鼠Adiponectin生物素化抗體 10ml/5ml

親和素連接的HRP酶 10ml/5ml

濃縮洗滌液 20× 30ml/15ml

TMB底物 10ml/5ml

中止液 5ml/3ml

封板膠紙 3/2張

說明書 1份

標本收集:

1.標本的收集請按下列流程進行操作；

A.細胞上清標本離心去除懸浮物后即可；

B.血清標本應是自然凝固后，取上清，避免在冰箱中凝固血液；

C.血漿標本，推薦用EDTA的方法收集；

D.若待測樣本不能及時檢測，標本收集后請分裝，凍存于－20℃，避免反復凍融。

2.血清標本不應添加任何防腐劑或抗凝劑；上海傳秋生物科技有限公司 424100.com.cn

3.標本應清澈透明，檢測前樣本中如有懸浮物應通過離心去除。

4.請勿使用溶血高血脂或污染的標本檢測，否則結果將不準確。

注：大鼠血清或血漿樣本請用標準品稀釋液稀釋后再檢測。

注意事項:

1.試劑盒請保存在2～8℃。

2.濃縮洗滌液因在低溫下可能有結晶，請水浴加熱使結晶完全溶解后再配制工作液。

3.標準品復溶加樣后，剩余部份請丟棄。

4.底物請勿接觸氧化劑和金屬。

5.加樣時，請及時更換槍頭，避免交叉污染。

6.嚴禁混用不同批號的試劑盒組份。

7.充分混勻?qū)ΡＷC反應結果的準性很重要，在加液后請輕輕叩擊邊緣以保證混勻。

8.室溫反應，請嚴格控制在25～28℃。

9.洗滌過程是至關重要的，洗滌不充分會使精確度下降并導致結果誤差較大。

10.試驗中標準品和樣本檢測時建議作雙復孔。

11.加樣過程中避免氣泡的產生。

12.血清和血漿標本的檢測時，檢測抗體的孵育時間應適當延長。

檢測前準備工作:

1.試劑盒自冰箱中取出后應置室溫（25-28℃）平衡20分鐘；每次檢測后剩余試劑請及時于2～8℃保存。

2.將濃縮洗滌液用雙蒸水或去離子水稀釋(1份加19份水)。

3. 將5×標準品稀釋液用雙蒸水或去離子水稀釋(1份加4份水)。

4.標準品: 按標簽復溶體積加入1×標準品稀釋液復溶使Adiponectin 終濃度達到10pg/ml，室溫反應，請嚴格控制在25～28℃，靜置15~20

分鐘后輕輕混懸（建議抽吸幾次）待徹底溶解，用標準品稀釋液倍比梯度稀釋后依次加入檢測孔中。（標準曲線取七個點，最高濃度為10 pg/ml,

標準品稀釋液直接加入作為0濃度.）

洗滌方法:

自動洗板機或人工洗板：每孔洗滌液為300ul，注入與吸出間隔15-30秒。最后一次洗板完成后將板倒扣著在厚吸水紙上用力拍干。

實驗過程需自備的材料：

1.不同規格的加樣槍及相應的槍頭； 2.酶標儀；

3.自動洗板機； 4.去離子水或雙蒸水；

操作步驟:

1.通過計算并確定一次性實驗所需的板條數，取出所需板條放置在框架內，暫時用不到板條請放回鋁箔袋密封，保存于4℃。

2.建議設置本底較正孔，即空白孔,設置方法為該孔只加TMB顯色液和中止液。每次實驗均需做標準品對照并畫出標準曲線。

3.分別將標本或不同濃度標準品(100ul/孔)加入相應孔中，用封板膠紙封住反應孔，室溫（25-28℃）孵育120分鐘。細胞上清樣本無需稀釋。

如果是血清血漿樣本，不同樣本稀釋比例不一樣，一般范圍在200~1000倍，如無明確范圍，建議從200倍開始。

4.洗板5次，且最后一次置厚吸水紙上拍干。

5.加入生物素化抗體工作液(100ul/孔)。用封板膠紙封住反應孔，室溫（25-28℃）孵育60分鐘。

6.洗板5次，且最后一次置厚吸水紙上拍干。

7.加入親和素連接的HRP酶工作液(100ul/孔)。用封板膠紙封住反應孔，避光室溫（25-28℃）孵育20分鐘。

8.洗板5次，且最后一次置厚吸水紙上拍干。

9.加入顯色劑TMB100ul/孔，避光室溫（25-28℃）孵育20分鐘。

10.加入中止液50ul/孔,混勻后即刻測量OD450值。大鼠脂聯素參考標準曲線

0

0.5

1

1.5

2

2.5

0 0.3125 0.625 1.25 2.5 5 10

大鼠脂聯素濃度(ng/ml)

O

D值

上海傳秋生物科技有限公司 424100.com.cn

結果判斷:

1.復孔的值在20%的差異范圍內結果才有效，復孔的值平均后可作為測量值。

2.每個標準品或標本的OD值應減去本底校正孔的OD值。

3.手工繪制標準曲線。以標準品濃度作橫坐標，OD值作縱坐標，以平滑線連接各標準品的坐標點。通過標本的OD值可在標準曲線上查出其

濃度。

4.若標本OD值高于標準曲線上限，應適當稀釋后重測，計算濃度時應乘以稀釋倍數.

典型數值和參考曲線

濃度pg/ml 典型OD值1 典型OD值2 OD平均值

0 0.084 0.06 0.072

0.3125 0.237 0.221 0.229

0.625 0.435 0.391 0.413

1.25 0.672 0.624 0.648

2.5 1.025 0.901 0.963

5 1.472 1.424 1.448

10 2.174 2.004 2.089

大鼠Adiponectin參考標準曲線

注意：本圖僅供參考，應以同次試驗標準品所繪標準曲線計算標本含量。

靈敏度，特異性和重復性:

1.靈敏度：多次重復結果表明，最小檢出量為86.6pg/ml。

2.特異性：與大鼠TNF-α 、TWEAK等沒有交叉反應。與人和小鼠Adiponectin元交叉反應。

3.重復性：板內，板間變異系數均<10%.

參考文獻:

1. Wang, Y. et al. (2005) J. Biol. Chem. 280:18341.

2. Ohashi, K. et al. (2011) Am. J. Hypertens. 24:263.

3. Combs, T.P. et al. (2001) J. Clin. Invest. 108:1875.

4. Fruebis, J. et al. (2001) Proc. Natl. Acad. Sci. 98:2005.

5. Yano, W. et al. (2008) Endocr. J. 55:515.

6. Hirose, H. et al. (2010) J. Atheroscler. Thromb. 17:1201.上海傳秋生物科技有限公司 424100.com.cn

ELISA Kit for the Quantitative Analysis of Rat Adiponectin

The rat Adiponectin ELISA (enzyme-linked immunosorbent assay) kit is used for detection of rat Adiponectin in cell culture

supernatants,rat serum and plasma.THE ELISA KIT IS FOR RESEARCH USE ONLY. Please read this instruction manual carefully and

check out the material provided before use, and you can contact with our company if any questions. You can enter our website or call us

for other aim.

Introduction

Adiponectin (also called ACRP30 and GBP28) is an adipocytederived protein with wide ranging paracrine and endocrine effects on

metabolism and inflammation. It is induced during adipocyte differentiation, and its secretion is stimulated by insulin. It promotes

adipocyte differentiation, fatty acid catabolism, and insulin sensitivity and is negatively correlated with obesity, type 2 diabetes, and

atherogenesis. In this context, Adiponectin is an antiinflammatory agent, but it exerts proinflammatory effects in nonmetabolic disorders

such as rheumatoid arthritis and inflammatory bowel disease

Mature rat Adiponectin consists of a 66 amino acid (aa) N-terminal collagenous region and a 137 aa C-terminal C1q like globular

domain. In the circulation, adiponectin is present as three different oligomeric complexes, including the high molecular

weight (HMW), the middle molecular weight (MMW, also called hexamer) and low molecular eigh (LMW, also called trimer) forms.

Different oligomeric complex of adiponectin activates different signaling pathways and exerts distinct functions.

Principles of the Test

The kits is a solid sandwich enzyme-linked immunosorbent assay for detection of rat Adiponectin. An anti-rat Adiponectin monoclonal

antibody has been absorbed onto the wells of the microtiter strips provided. Samples including specimens or standards were pipetted into

wells. The rat Adiponectin in specimens or standards would be captured by the coated antibody and the free others were removed by

washing. The rat Adiponectin biotin-conjugated antibody were added and binds to rat Adiponectin captured by the first antibody, which

formed a sandwich. Streptavidin-HRP would be added and binds to the biotin conjugated antibody, then free Streptavidin-HRP would be

removed during a wash step. After this, subtrate solution would be added and catalyzed by the HRP, and a coloured product is formed.

The intensity of the colored product is used to calculate in proportion to the amount of rat Adiponectin in the original specimen. .

Materials provided with the kits:

Reagent 96/48Test Kit

Rat Adiponectin Antibody-Coated Wells 12 strips/6 strips

5×Standard Diluent 20ml/10ml

Rat Adiponectin Standard 2/1vial(s)

Rat Adiponectin Detetion Antibody 10ml/5ml

Streptavidin-HRP 10ml/5ml

Wash Buffer Concentrate 20× 30ml/15ml

TMB 10ml/5 ml

Stop Solution 5ml/3 ml

Plate Covers 3/2

Complete Instruction Manual 1

Specimen Collection

1.Collecting specimen as following:

A.The particulate of the cell culture supernatants should be removed before use.

B.Serum was obtained from clot at room temperature.

C.Please collect plasma with EDTA.

D.Assay immediately or store samples at －20℃. Avoid free-thaw cycles.

2．Antiseptic and anticoagulant should not appear in Serum

samples.

3. Any particulate should be removed from samples before use.

4. Do not use grossly hemolyzed or lipemic samples.Note: Strongly recommend that the serum and plasma samples should be diluted before use.

Precautions for use:

1. Please storage the Kit at 2～8℃。

2. Washing buffer concentrate may have crystal in low temperature, and you can melt its in water-bath before use.

3. Please discard the remains after use of the dissolved standard.

4. Avoid contact of substrate solution with oxidizing agents and metal.

5. Usage of disposable pipette tips avoid microbial contamination or cross-contamination of reagents or specimens.

6. Do not mix or substitute reagents with those from other lots or other sources.

7. To ensure the adequate mixure of added reagents, please tap gently the plate after the wells were filled with liquid.

8. Incubation temperature should be 25～28℃.

9. Wash step was crucial for whole assay process.

10. Duplicate wells of the same sample were recommended in assay process.

11. Avoid the foam while pour the liquid into wells.

12.For serum or plasma samples ,the biotin-conjugated antibody should be incubate for at least 90 minutes.

Reagent Preparation

1.The reagents should be warmed up to room temperature before use. The remanent reagents must reseal and put into refrigeratory

again as soon as possible.

2.Dilute 1ml of wash buffer Concentrate into 19ml deionized or distilled water to work.

3. Dilute 1ml of 5×sample diluent into 4ml deionized or distilled water to 1×sample diluent.

4. Addsample diluen to the bottle according to the volume of the label and wait15 minutes for complete dissolution. Incubation

temperature should be 25- 28℃。.And in turn add the half concentration diluent by standard diluent .

Wash step:

Automated microplate washer or operating by pipette: Each well should be pour into 300ul wash buffer and soak 15 or 30 seconds,then

be aspirated, five times process were repeated. After the last wash, remove remaining wash buffer by aspirating. Invert the plate and blot

it against clean paper towels.

Materials Required But Not Provided

1. pipettes and pipette tips

2. Microwell strip reader capable of reading at 450 nm (540 nm as optional reference wave length)

3. automated microplate washer

4.Glass-distilled or deionized water

Assay procedure

1.The needed strips were putted into the frame, the remains were returned into foil pouch and resealed.

2.Blank well were recommended, which only color reagent and stop solution be added. It is suggested that each testing with gradient

density of standard for standard curve.

3.Add 100ul of standard or sample.Cover with the Plate Covers provided.Incubate for 2 hours at room temperature. If is plasma serum

samples, different sample dilution ratio is different, generally in the range of 100 ~ 1000 times, if there is no definite scope, advice from

200 times dilution, if the sample concentration is too high, more than test scope, please increase after diluted times dilution test again.

4.Five times wash process were repeated.

5.Add 100ul of detetion antibody. Cover with the Plate Covers provided.Incubate for 1 hour at room temperature.

6.Five times wash process were repeated.

7.Add 100ul of Streptavidin-HRP. Cover with the Plate Covers provided. Lucifugal incubation for 20 minutes at room temperature.

8.Five times wash process were repeated.

9.Add 100ul of TMB，Lucifugal incubation for 20 minutes at room temperature.

10.Add 50ul of stop solution to each well, determine the optical

density of each well within 10 minutes.

Calculation of Results

1.Duplicates should be within 20 percent of the mean. Average absorbance values for each set of duplicate samples were used as

detection results.

2.The blank absorbance values of subtract should be deducted.

3.Drawing a best fit curve through the points of graph. Draw the standard curve by plotting assayed OD valure (on the Y axis) vs.

concentration (on the X axis). The sample concentration was obtained based on its OD value founding in the standard concentration

curve.

4.If the values obtained are not within the expected range of the standard, Samples should be dilute and assay again.

Typical Data and Standard Curve

concentration

(ng/ml)

Typical data 1 Typical data

2

Average

0 0.084 0.06 0.072

0.3125 0.237 0.221 0.229

0.625 0.435 0.391 0.413

1.25 0.672 0.624 0.648

2.5 1.025 0.901 0.963

5 1.472 1.424 1.448

10 2.174 2.004 2.089

Rat Adiponectin Standard Curve

Sensitivity, Specificity, Repeatability

Sensitivity: repeated assays were evaluated and the minimum detectable dose was 86.6pg/ml.

Specificity : No significant cross-reactivity or interference with rat TNF-α 、TWEAK ,human Adiponectina and mouse Adiponectin.

Repeatability: The coefficient of variation between wells or plates is less than 10 per cent.

REFERENCES:

1. Wang, Y. et al. (2005) J. Biol. Chem. 280:18341.

2. Ohashi, K. et al. (2011) Am. J. Hypertens. 24:263.

3. Combs, T.P. et al. (2001) J. Clin. Invest. 108:1875.

4. Fruebis, J. et al. (2001) Proc. Natl. Acad. Sci. 98:2005.

5. Yano, W. et al. (2008) Endocr. J. 55:515.

6. Hirose, H. et al. (2010) J. Atheroscler. Thromb. 17:1201.